Datacomm 45-0028-WH Recessed Pro-Power Kit Manuel d'utilisateur télécharger pdf

Use the Recessed Pro-Power Kit with Duplex Receptacle and Straight Blade Inlet to install power and low voltage cables behind your flat panel TV,

amplifier or other audio and video devices to your equipment room or at the location of your head end equipment (see Figures 1 & 2).

DataComm Electronics, Inc.

6349 Peachtree Street

Norcross, GA 30071-1725

888.223.7977

770.662.8205

www.datacommelectronics.com

Instruction / Installation Sheet

DataComm Electronics 45-0024-WH Recessed Pro-Power Kit with Duplex Receptacle and Straight Blade Inlet

Parts Included:

1. Recessed Low Voltage Mid-Size Plate with Duplex Receptacle

2. Recessed Low Voltage Cable Plate with Straight Blade Inlet

3. Two (2) Electrical Outlet Boxes

Four (4) Screws per Outlet Box

4. 15 Amp/125 Volt Tamper Resistant Duplex Receptacle

5. Three (3) Wire Nuts

6. 6ft. 16/2 with Ground Cord Set with 360

Rotating Head

Tools Needed:

1. Drywall Saw

2. 6 Ft. Tape Measure

3. Pencil

4. Screwdriver

Figure 1 – Front View

Figure 2 – Back View

IMPORTANT INSTRUCTIONS:

 Use the local electrical code approved installation when installing this product.

 The electrical parts in this kit are designed to be used only as a kit and none of these electrical parts are designed to be used individually.

 This product is not designed to be part of your home or a commercial building’s electrical wiring system.

 This installation is only energized (electrically active) when the supplied 6 ft. cord is plugged into the recessed straight blade inlet located on the

recessed low voltage cable plate and the straight blade end of the 6 ft. cord is plugged into either your surge protector or wall receptacle.

If you are not familiar with home wiring systems, please call a qualified electrician to install this product.

IMPORTANT INSTRUCTIONS:

This product is designed for retrofit work only because the electrical outlet box cannot be attached to a stud.

Installation Instructions for Retrofit Only:

Select the location of your flat panel TV mounting bracket. Now select the location for both cable plates for the Recessed Pro- Power Kit with Duplex

Receptacle and Straight Blade Inlet.

Page 1 of 4 9/21/12

1 2 3 4 5 6 7 8

TEMPLATE 4

Résumé du contenu

Page 1

Use the Recessed Pro-Power Kit with Duplex Receptacle and Straight Blade Inlet to install power and low voltage cables behind

Page 2

Fig. 3 Fig. 1 Fig. 5 Fig. 2 Figure 1 Top view - shows needed space between the dr

Page 3

Installation Instructions for the Bottom Cable Plate with Straight Blade Inlet: WARNING  Data

Page 4 - TEMPLATE

6-1/2” 4-11/16” ONLY LICENSED PROFESSIONALS SHOULD INSTALL THIS PRODUCT TEMPLATE Reces

Page 5

Use the Recessed Pro-Power Kit with Duplex Surge Suppressor to install power and low voltage cables behind your flat panel TV

Page 6

Installation Instructions for the Top Plate with Duplex Surge Receptacle:

Page 7

Installation Instructions for the Bottom Cable Plate with Straight Blade Inlet WARNI

Page 8

6-1/2” 4-11/16” ONLY LICENSED PROFESSIONALS SHOULD INSTALL THIS PRODUCT TEMPLATE Reces

Commentaires sur ces manuels

Pas de commentaire

Datacomm 45-0028-WH Recessed Pro-Power Kit Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Systèmes de cinéma à domicile Datacomm 45-0028-WH Recessed Pro-Power Kit. DataComm 45-0028-WH Recessed Pro-Power Kit User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de cinéma à domicile Datacomm 45-0028-WH Recessed Pro-Power Kit